HAKO Citymaster 2200, Operating Manual

Page: 141 / 238

03-1481-00-00.fm
141
Operation
3.4.6 Before start-up of the vacuum sweeping system
Filling the fresh water tank
Fill the fresh water tank
Fig. 109-A
before commencing work or as
required. The level of the fresh water tank is monitored. If the level is too
low, the symbol
Fig. 111-B
appears in the multifunction display.
Raise the rubber skirt
Fig. 109-C
and open the filler cap
Fig. 109-D
. Fill
the fresh water tank using a water hose. Tank volume, see Technical
data.
No. Description Page
1 Check all items from the checklist – Before start-up of the vehicle 109
2 Filling fresh water 141
3 Filling circulating water 142
4 Checking the presetting of 3rd brush 223
5 Checking the sweeping level 224
6 Checking the suction mouth sealing strips 226
7 Checking the suction duct seal 228
8 Checking the dirt hopper seal 228
9 Checking the lubrication points 224
Fig. 109:
C
D
A
B