HAKO Citymaster 2000, Operation And Maintenance Instructions, Page: 52 / 186

3-24
X56b320.fm
Operation
3.4.3 Speedometer
Function:
Indicates the current driving speed in kph (kilometres per hour) and mph
(miles per hour).
Important!
The speedometer has been set at the factory to the tyre size fitted
on the vehicle at delivery. If the vehicle is fitted with a different tyre
size, the speedometer must be set accordingly by an authorised
Hako workshop!
3.4.4 Ignition switch
Important!
The engine will not start unless drive lever 67 is in neutral.
The ignition switch 58 is equipped with a start repeat lock to prevent
the starter from engaging into the running diesel engine: Switch
back to position 0 (Stop) before switching again from position 1 to
position 2 .
Fig. 21:
132
1
2
58
0
Fig. 22:
(Stop)
Posi-
tion
Function Power consumer
0
(Stop)
Ignition OFF/parking posi-
tion
Insert or remove the igni-
tion key
Parking light, cigarette lighter,
interior lighting, rotating beacon,
hazard warning light
1 Ignition ON / driving posi-
tion
System check
Engine preheating
(below 5 °C approx.
20 seconds)
All telltales and warning lights
(except 85 ) light for about.
2 seconds
Warning light
87 lights if parking
brake 63 is applied
All telltales and warning lights
light for approx. 3 seconds
Warning lights
84 , 83 light
Telltale 85 (preheating) lights,
engine is preheated until telltale
goes off
All functions are operational
2 Starts the engine Starter is actuated
Telltales and warning lights must
go off