Cleaning technology
•
Municipal technology
Short instructions for Citymaster 1650
88-10-3199-4037-0
Hako GmbH - Head Office - Hamburger Str. 209-239 - 23843 Bad Oldesloe, Germany
Tel. +49 4531 806-0 - Fax +49 4531 806-338
1. Preparing for driving
Page 88
Move the accelerator pedals
38/39
to the neutral
position.
Actuate the brake pedal
47
or the parking brake
81
.
Warning light
A
lights up. Fasten the seat belt!
3. Starting transport mode
Page 90
Release the parking brake
81
. Warning light
A
off.
Use the accelerator pedal
38/39
to select the driving
direction.
Working with the vacuum sweeping system
1. Installing the vacuum sweeping system
Page 130
Further installation descriptions for attachments
can be found in the operating manual for the CM 1650.
2. Topping up circulating water D
Page 138
3. Topping up fresh water E
Page 139
2. Starting the engine
Page 89
Use the ignition switch
82
to preheat the engine.
Start the engine once the telltale
B
goes out.
Observe the warning symbols!
Page 48
4. Parking the vehicle
Page 95
Move the accelerator pedal back to the neutral position.
Lock the parking brake
81
. Warning light
A
on.
Driving with the Citymaster 1650
Safety information
These short instructions may be used only in conjunction with the original operating manual!
All cross-references
refer to the pages in the CM 1650 operating manual.
Please observe the safety information in the operating manual, as from page 11!
Information about special risks, as from page 16! The vehicle may be put into operation only by trained
personnel!
47
39
81
82
B
38
C
A
D
E
