HAKO Citymaster 1600, Operating Manual

Page: 80 / 222

80 03-1491-00-11.fm
Operation
3.5.2 Towing the vehicle
The wheels are blocked when the vehicle is at a standstill. Proceed as fol-
lows for towing or displacing.
1. The towing eye
Fig. 78-A
is located in the rear wagon on the right and
must be mounted on the holder
Fig. 78-B
of the front tool
carrier
Fig. 78-12
.
2. Turn the lever of the hand pump
Fig. 78-D
into the upper position.
•
upper position = unlock the parking brake
•
lower position = raise/lower the dirt hopper
3. Close the ball cock
Fig. 78-E
to the right of the hand pump (see
symbol).
4. Open the ball cock
Fig. 78-F
of the bypass valve (see symbol).
5. Insert the auxiliary tool
Fig. 78-G
in the hand pump
Fig. 78-C
and
pump so long (approx. 25 times) until the parking brake is unlocked.
Caution
After completing the towing process, open the ball cock
Fig. 78-E
again and close the ball
cock
Fig. 78-F
of the bypass valve again. Set the lever of the hand pump
Fig. 78-C
to the lower
position again!
Fig. 78:
C
12
D
A
F
F
C
B
A
B
D
E
G
E