HAKO Citymaster 1600, Operating Manual

Page: 205 / 222

06-1491-00-12.fm 205
Attachments and Options
Cleaning heavily soiled surfaces
•
Select the detergent, see Section Maintenance
•
Set the mixing ratio, see Section Maintenance
•
Select the brush, see Section Maintenance
•
Set the brush speed, suction fan speed and brush pressure in the
working menu of the multifunctional display, see Section Checklist –
Settings for wet cleaning.
Furthermore, it is possible to enhance the cleaning result by performing
the cleaning process in two worksteps.
First workstep (soaking):
Move the CityCleaner into the upper position with the joystick
Fig. 209-70
and fix the squeegee into position by closing the ball cock
Fig. 209-A
.
Press the Hako button
Fig. 209-72
and start the first workstep. During this
workstep, the applied detergent remains on the surface in order to soak
into the dirt.
Second workstep (vacuuming):
After the detergent has been allowed to soak in, clean and vacuum the
same surface again. To do this, open the ball cock
Fig. 209-A
again.
Press the Hako button
Fig. 209-72
and start the second workstep.
Fig. 209:
72
70
A