HAKO Citymaster 1600, Operating Manual

Page: 165 / 222

06-1491-00-12.fm 165
Attachments and Options
Checklist – Cleaning the lawn mowing system
Cleaning the mower and suction pipe
1. Raise the mower with the joystick
Fig. 164-70
, mount it in the transport
position and drive to a suitable cleaning place.
2. Turn the steering wheel as far as possible to the right at the cleaning
place. Switch the engine off and pull out the ignition key.
3. With the lance
Fig. 163-A
open the flap
Fig. 163-B
of the suction
mouth and remove the coarse dirt. Lock the flap again with the lance.
4. Switch the vehicle on and switch on the suction fan
Fig. 163-E
in the
working menu of the multifunctional display and let it run for one to two
minutes.
5. Pull the mounting bolt
Fig. 164-A
out and lower the mower with the joy-
stick.
6. Plug a water hose onto the hose coupling
Fig. 163-B
and let the mower
run for one to two minutes.
7. Clean the mower from the outside with a water hose or a high-pressure
cleaner.
No. Description Reference
1 Emptying the dirt hopper Page 143
2
Cleaning the dirt hopper
Page 145
3
Cleaning the mower and suction pipe
Page 165
Fig. 163:
70
B
B
B
A
A B
E