HAKO Citymaster 1600, Operating Manual

Page: 119 / 222

06-1491-00-12.fm 119
Attachments and Options
6.1.1 Labels on the unit
Reflector
The reflectors (red/white)
Fig. 98-A
are located on the cover of the sweep-
ing unit of the 2-brush system, the 3-brush system and at the back of the
dirt hopper.
Type plate
The type plates
Fig. 98-B
are located on the sweeping unit of the 2-brush
system, the 3-brush system, on the dirt hopper, on the trolley and on the
supports.
Label PM10
The fine dust certificate label PM10
Fig. 98-C
is located on the dirt hop-
per.
Label – Read operating manual
The label – Read operating manual
Fig. 98-D
is located on the sweeping
unit of the 3-brush system.
Hako name plate
The Hako name plate
Fig. 98-E
is located on the sweeping unit of the
2-brush system and the 3-brush system.
6.1.2 Vacuum sweeping system safety instructions
Danger
•
Danger to life in the danger area of the vehicle! Special caution is required under the raised tipper
and in the area of the sweeping unit.
•
Danger of tilting over when driving uphill or downhill and transversely to a slope! Avoid sudden
turns when driving uphill or downhill or across slopes. There is a risk of tilting over in an inclined
position! The vehicle speed must always be adapted to the surrounding conditions and the load
condition.
•
Danger of tilting due to wrong steering! Note that the steering behaviour of an articulated steered
vehicle differs essentially from that of a car. Sudden steering movements at high speed or too high
speeds when turning can cause the vehicle to tilt over.
•
Risk of injury! Frequently check the filling level of the dirt hopper. Switch the suction fan off for this!
The lid and the side doors of the dirt hopper must not be opened when the suction fan is running.
•
Risk of accident! Make transport journeys only with the sweeping unit raised and secured in the
transport position.
•
Risk of accident! Make transport journeys only with a completely lowered dirt hopper!
•
Risk of accident! The stability of the vehicle is influenced by a filled dirt hopper. Handling of the
vehicle must be adapted accordingly.
•
Risk of accident! Do not exceed the permissible total weight of the vehicle!
•
Risk of accident! When the dirt hopper is emptied, the Citymaster 1600 must be on a sufficiently
load bearing, horizontal surface. Driving with the dirt hopper tilted is not permitted.
Warning
•
When removing blockages in the suction hose or attaching the hand suction hose (optional),
switch off the engine and wait for the suction fan to come to a standstill.
•
The sweeping system may be operated only in connection with the Citymaster 1600. The safety
regulations for the Citymaster 1600 must be complied with absolutely.
Caution
•
The labels attached to the vehicle provide important information for safe operation. Renew labels
that are no longer legible or present.
•
Spare parts must be original spare parts to guarantee safety.