HAKO 7092.65, Assembly Manual

Page: 4 / 6

4
LED working light
1.3 Installing the working light
The working light is installed on the left
next to the front wheel (Fig. 2/1).
1. Fit working light to holder of chassis
(Fig. 2/2).
2. Insert corrugated hose holder into
existing hole (Fig. 2/3).
3. Secure cable of working light to cor-
rugated hose holder in such a way
that it is free of tension.
4. Lead cable through floor opening
into the interior (Fig. 2/4).
5. Connect plug of working light to
2-pin connector E01 of cable
loom W 3 (Fig. 2/5).
1.4 Adjusting the working light
Align working light so that it is straight-
ahead in the direction of travel.
Set tilt angle to approx 5° (Fig. 2/6).
Fig. 2
4
1
2
3
5
6
5°