Service Manual
Hako GmbH
Technical Service (KUD) 23843 Bad Oldesloe
Edition: 05/2014
Confidential - For internal use only!
3.2.2 Side broom
Provide for side brush inclination such that the contact surface covers about
2
/
3
of the brush circumference.
Seen in direction of travel, the floor contact surface of the r-h side brush should be between the
11
and
3
o’clock position.
l-h side brush
between the
9
and
1
o’clock position
Adjusting parallelism
•
Loosen l-h half-bearing of torsion shaft
•
Adjust parallelism with stop screw
Half-bearing
Torsion shaft
Stop screw
