HAKO 5305.00, Assembly Manual

Page: 4 / 18

4
Fleet-Recorder Scrubmaster B75 R
1.2 Installing the Fleet-Recorder
Scrubmaster B75 R
Caution
Prior to installation, place the
machine on a level surface, se-
cure it against rolling away and
disconnect the battery plug!
Make all the electrical connec-
tions according to the circuit
diagram of the respective
machine variant.
1.2.1 Installing the I-Button-Reader
1. Use the extractor to disassemble the
steering wheel.
2. Disassemble the control panel.
3. Cut into the film in the area of the
right-hand hole on the rear of the
control panel (Fig. 2/1).
4. Install the I-Button-Reader.
5. Connect the plug of the
I-Button-Reader to the 4-pole plug
B20/X1 of the existing W60 cable
loom (Fig. 2/2).
6. Reinstall the control panel and the
steering wheel.
7. Position the RFID lock sticker under-
neath the I-Button-Reader.
Fig. 2
2
3
3
1