Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
WARNING: Before using this appliance, read this operator’s manual and follow all its safety rules and
operating instructions.
DESCRIPTION
Model TUNKHA15AL features a 1,5 ton maximum capacity. Lifting range for this jack is from 90 mm to 358
mm. Jack features an overload valve which helps prevent equipment failure. Bypass system provides safe
operation.
Specifications
•
Maximum load capacity 1,5 t
•
Lifting height 268 mm
SAFETY INSTRUCTIONS
Read operating instructions
Study, understand and follow all instructions in this manual before
operating the jack. Failure to heed these warnings may result in
loss of load, damage to the jack and/or jack failure resulting in
personal injury or property damage.
Position the jack
Position the jack to only lift on the areas of the vehicle specified
by the vehicle manufacturer.
Use support stands
After lifting the vehicle always support the load with appropriately
rated vehicle supports stands before working on the vehicle.
Do not overload the jack
Do not overload this jack beyond its rated capacity. Overloading
this jack beyond its rated capacity can cause damage to or failure
of the jack.
Use on hard level surface
This jack is designed only for use on hard level surfaces capable
of sustaining the load. Use on other than hard level surfaces can
result in jack instability and possible loss of load.
Center load on jack saddle
Center load on jack saddle before lifting vehicle. Off-center loads
and loads lifted when jack is not level can cause loss of load or
damage to the jack.
Check the jack before each use for visible signs of damage
and for normal operation. Do not use if any defect is found.
