Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
General service temperature for Haklift lifting shackles is -20°C to +200°C. If extreme temperature
situations are applicable, the following load reduction must be taken into account:
Temperature
Reduction for elevated temperatures, New
Working Load Limit
-20°C - 200°C
100% of original Working Load Limit
200°C - 300°C
90% of original Working Load Limit
300°C - 400°C
75% of original Working Load Limit
➢
400°C
Not allowed
MARKING
The following markings can be found on Haklift lifting shackles conforming to US Fed. Spec. RR-C-
271:
•
CE mark;
•
batch/traceability code; (e.g. 15-1, EZL etc.)
•
dimension in inches;
•
manufacturer identification; (ABT)
•
WLL in Tonne;
•
grade
MAINTENANCE AND REPAIRS
Shackles should be cleaned regularly, dried when in contact with wet atmospheres and protected
from corrosion. The product needs to be inspected in clean condition. Inspection should take place
at least every six months by a competent person. However, this period must also be shortened in
view of conditions of use.
Products are only to be repaired by a qualified person. Welding, heat treatments, as well as the
straightening of bent products are not permitted. Inspections and repairs shall be documented and
the corresponding reports must be retained during the lifespan of the product.
