Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
Note:
Operator/Owner must read and understand this instruction manual before using the product. Incorrect
use may lead to personal injury or property damage. To be used only by competent and skilled personnel.
Retain this manual for future reference.
SAFETY INSTRUCTIONS AND WARNINGS (If operating the lift table improperly, a person may be seriously
injured. Therefore, operate properly according to the following instruction.)
•
Read and thoroughly understand this instruction manual completely before using. Follow
all safety instructions strictly.
•
It is necessary to check all safety devices before operation. Do not use the lift table if any
malfunction or fault/damage is found.
•
Make sure that there are no obstacles in the working area.
•
Do not put foot, hand or any other part of the body in scissor mechanism, through frame
or under the platform.
•
Unscrew the lifting eyes from the base frame before working on the lift table.
•
Do not overload the lift table. Load should be distributed on the table according to relevant
load distribution chart. Ensure the balance of the load.
•
Pay attention that the local voltage and frequency is as same as the input specification of
the lift table.
•
Use the lift table on flat and solid ground.
•
All the electrical connection and disconnection operations must be carried out by skilled
and competent personal.
•
While operation, it is forbidden to contact the moving parts of the lift table.
•
While the lift table moving, it is forbidden to adjust or to move the load.
•
It is forbidden to lift the load, which perhaps does harm to a person or other object.
•
It is forbidden to operate the lift table while a person is under the table.
•
Do not adjust the safety valve of hydraulic power pack.
•
It is forbidden to operate the lift table if there is even a small structure distortion.
•
Do not use in explosive or flammable place.
Note! Maximum load refers to the load being uniformly distributed over the entire platform area.
In accordance with
EN1570,
safety requirements for lifting tables, the basic requirements are:
Ⅰ
100% of the rated load (maximum load) uniformly distributed over the entire platform area.
Ⅱ
or 50% of the rated load (maximum load) uniformly distributed over half the length of the
platform.
Ⅲ
or 33% of the rated load (maximum load) uniformly distributed over half the width of the
platform.