2
ATTENTION:
1. The waste packages should be sorted and put into solid dustbins according to the
materials and be collected disposal by local special environment protection bureau.
To avoid pollution, it’s forbidden to throw away the wastes randomly.
2.
To avoid leaking during the use of the products, the user should prepare some
absorbable materials (scraps of wooden or dry duster cloth) to absorb the leaking
oil in time. To avoid second pollution to the environment, the used absorbable
materials should be handed in to special departments in terms of local authorities.
Thank you for choosing our pallet truck. For your safety and correct
operation, please carefully read the manual before use.
NOTE:
All of the information reported herein is based on data available at the time of printing. The
factory reserves the right to modify its own products at any time without notice or incurring in any
sanction. Please verify with the factory for possible updates.
1. GENERAL SPECIFICATIONS
Model No.
AC50-A
WH10L-35-A
WH20L-51-A
WH25L-51-A
Standard
Low profile
Min. Fork Height
mm
85
35
51
Max. Fork Height
mm
200
85
156
Load Capacity
kg
5000
1000
2000
2500
Fork Length
mm
1150/1220
1120
1150/1220
Width Overall Forks
mm
540/685
530/685
540/685
Individual Fork Width
mm
180
160
Single load wheel
mm
No available
Ø50*70
Double load wheel
mm
Steel (78*66mm)
Nylon(80*66mm)
Ø34*58
Ø50*93
Type of load wheel
Nylon or PU(Polyurethane)
Steering Wheel size
mm
Ø178*50
Ø160*50
Ø180*50
Type of steering wheel
Nylon or Iron
Nylon or PU(Polyurethane)
Materials and specification are subject to change without notice.
2. TO ATTACH HANDLE TO PUMP UNIT
If you have purchased a wooden box of pallet truck, some assembly is required. Certainly, you
need some tools, a hammer, a pliers, a spanner, etc; and some parts, one axle with hole, two
elastic pins (
Note one is in the axle)
, these parts are putted in a plastic bag, which is putted into
the draw-bar.
NOTE: The number of draw-bar and pump should be the same.
