Hakko Electronics Monitouch V Series, Reference Manual

Page: 265 / 746

Chapter 8 Graph Display
8-30
[Data Length]
Choose data length for the memory to be used for the upper/lower line.
[1-Word]: word [2-Word]: double-word
[Graph Max.] [Graph Min.]
Scales can be attached for reference of drawing the upper and lower lines.
Negative values can also be specified.
Ex.: When drawing a subsidiary line in the center of the display area:
Set as shown below.
[ Upper Line Display]
[Upper Value 1]
[Graph Max.: 2]
[Graph Min.: 0]
A line is shown in the center.
♦
[Setting 3] Tab Window
[ Upper Line 2 Display] [ Lower Line 2 Display]
Two lines are added to both upper line and lower line.
This tab window is available when [ Upper Line 2 Display] or [ Lower
Line 2 Display] is clicked. The properties like [Data Length] or [Graph
Max./Min.] are specified in the [Setting 2] tab window. The settings are the
same as the present [Upper/Lower Line] in the [Setting 2] tab window.
Max 2
Min 0
1
Upper/Lower Line Display
Either option can be used.
[Graph Max.] and [Graph Min.] are used as reference for drawing lines, even if the trend
data range is from “0” to “1000.” Thus specifying “0,” “1,” and “2” as in the above
example is appropriate for attaching scales as reference for drawing the upper/lower
lines.
(Upper line 2)
With upper/lower four lines
(Upper line)
(Lower line)
(Lower line 2)