28920 Avenue Williams • Valencia • California 91355
Tel 661.294.0090 • Fax 661.294.0096 • www.hakkousa.com
American Hakko Products, Inc.
finished entering the Station ID and have not used all 15 spaces, hold the OK button for at least 3
seconds to accept the value and return you to the SETTINGS screen where you can make further
changes.
To edit a character, you will need to start from the SETTINGS screen and choose the PROFILE option,
followed by STATION ID. This will put the cursor at the first character. Make changes to this character
using the UP or DOWN buttons, or press OK to accept the value for the character and move to the next
character. To erase the character, hold the UP or DOWN button for at least 3 seconds. If you are
finished and have not used all 15 characters, hold the OK button for at least 3 seconds to accept the
value and return you to the SETTINGS screen where you can make further changes.
To erase the Station ID, you will need to erase each character of the Station ID as described in editing a
character above.
PROFILE 1 and PROFILE 2 – are where you can enter data for User Name and/or Solder Type. Press
the UP or DOWN buttons to select which profile you wish to work with, followed by OK. Then use the
UP or DOWN button to choose which data you want to enter, followed by OK. You will be prompted for
the data and you will use the UP and DOWN buttons to choose from the acceptable values of A through
Z, 0 through 9, hyphen (-), period (.), and blank space ( ) just like you were for the Station ID. The
process is the same for entering, editing, and erasing.
Note that the User Name data is used in the greeting during the quick startup check when you first turn
the soldering station on.
When you are finished with the User Name or Solder Type data, you will be returned to the SETTINGS
screen where you can make further changes.
ALERT TIME – is where you can set a value for approximate running time on the soldering station before
an alert is shown on the display prompting you to change the soldering iron tip. Acceptable values are
0000 through 9999. A value of 0000 effectively turns this feature off. You press the UP or DOWN
buttons to change each digit, and OK to accept the value. When you have finished with the last value,
you will be returned to the SETTINGS screen where you can make further changes.
SAVE and CANCEL – are the last two options in the SETTINGS screen. Whenever you make changes to
any of the settings, you need to select SAVE to commit them to the soldering station memory. Pressing
OK after selecting SAVE or CANCEL will cause the display to go back to showing you the graphic
representation of the power output to the soldering iron tip.
The last part of the system to be aware of is the SYSTEM RESET. This effectively returns the system to the
default settings just like a new soldering station that you just pulled out of the packing box. To perform
this operation, hold all three buttons on the front of the soldering station and turn the power switch on.
The display will show ‘INITIAL RESET’ and there will be a series of squares that disappear as a
countdown. When completed, the unit will start with the quick system check and display “Hello”.
