![background image](http://html1.mh-extra.com/html/hakko-electronics/fr-301/fr-301_instruction-manual_3323140001.webp)
OVERSEAS AFFILIATES
U.S.A.: AMERICAN HAKKO PRODUCTS, INC.
TEL: (661) 294-0090 FAX: (661) 294-0096
Toll Free (800)88-HAKKO
4 2 5 5 6
http://www.hakkousa.com
HONG KONG: HAKKO DEVELOPMENT CO., LTD.
TEL: 2811-5588 FAX: 2590-0217
http://www.hakko.com.hk
E-mail:[email protected]
SINGAPORE: HAKKO PRODUCTS PTE., LTD.
TEL: 6748-2277 FAX: 6744-0033
http://www.hakko.com.sg
E-mail:[email protected]
Please access to the following address for the other Sales affiliates.
http://www.hakko.com
HEAD OFFICE
4-5, Shiokusa 2-chome, Naniwa-ku, Osaka 556-0024 JAPAN
TEL:+81-6-6561-3225 FAX:+81-6-6561-8466
http://www.hakko.com E-mail:[email protected]
© 2017 HAKKO Corporation. All Rights Reserved.
2017.9
MA02939XZ170928
1. PACKING LIST AND PART NAMES
Please check to make sure that all items listed below are included in the package.
2. SPECIFICATIONS
Part name
HAKKO FR-301
Nozzle to ground
potential
<2 mV
Power supply
100V-98W (50/60Hz), 110V-122W
(50/60Hz), 120V-140W (60Hz),
220V-100W (50/60Hz), 230V-110W
(50/60Hz), 240V-120W (50/60Hz)
Vacuum generator
Diaphragm pump
Vacuum pressure
81 kPa (610 mmHg)
Suction flow
11 L/min
Temperature range
350
to
500 °C (660 to 930 °F)
Dimensions
215 (W) × 226 (H) mm/8.3 × 8.9 in.
Nozzle to ground
resistance
<2 Ω
Weight
0.52 kg/1.1 lb. with ø1.0 mm
[0.04 in] nozzle
• The temperature was measured using the HAKKO FG-101 Station Tester.
• Specifications and design are subject to change without notice.
HAKKO FR-301 .....................................................1
Ceramic paper filter (L) .........................................2
Nozzle wrench ........................................................1
Pre-filter ..................................................................1
Iron holder ..............................................................1
Cleaning Pin (for ø1.0mm [0.04 in] nozzle) ............1
Cleaning Pin (for Heating Element) ........................1
Instruction manual (This manual) ...........................1
Desoldering Tool
Instruction Manual
Thank you for purchasing the HAKKO FR-301 Desoldering Tool.
Please read this manual before operating the HAKKO FR-301.
Please keep this manual readily accessible for reference.
HAKKO FR-301
Ceramic paper filter (L)
Iron holder
Nozzle wrench
Cleaning Pin
(for ø1.0mm [0.04 in]
nozzle)
Cleaning Pin
(for Heating Element)
Pre-filter