Hakko Electronics FH-200, Service Manual

Page: 1 / 27

First Edition: March 31, 2007
[ For FX951-51 -up ]
Service Manual
TABLE OF CONTENTS
Revision History
Chapter 1 Inspection Flow Chart
Chapter 2 Procedure and Method of Repair
2-1 Checking the Exterior
2-2 Checking the Power Supply Line
2-3 Checking the Interior
2-4 Voltage Application Check
2-5 Iron Holder Check
2-6 Inspection after Repair
Chapter 3 Exploded Drawings and Parts List
3-1 Exploded Drawings
3-2 Station Parts List
Chapter 4 Disassembly Procedure
4-1 Opening the Cover
4-2 P.W.B. (for Control/Connector) and Front Panel
4-3 Power Receptacle, Power Switch and Transformer
4-4 Jack
4-5 Iron Holder
Chapter 5 Wiring Diagram
Warnings, cautions and notes are placed at critical points in this manual to direct the
operator’s attention to significant items. They are defined as follows: Please read the
following sentences and understand them sufficiently before reading the main text.
Cautionary points during use
▲
WARNING: Failure to comply with a WARNING may result in serious injury or death.
△
CAUTION: Failure to comply with a CAUTION may result in injury to the operator, or
damage to the items involved.
NOTE: Indicates the items which operators are likely to make a mistake in and
should pay attention to.