is deformed due to use of leads thicker than those determined by
the specifications.
For the maximum applicable lead diameters, see the table below.
HAKKO 153 HAKKO 154
Maximum applicable lead diameters ø0.8
ø0.5
Bending wheel guide with deformed blade
spring
New bending wheel guide
Solution: Replace the bending wheel guide with a new one.
Replacement parts list for HAKKO 153/154
It is advisable to replace both H-side and P-side
bending wheels at the same time even when
only either one of them requires replacement.
Case 2: Leads get twisted. Why?
The probable cause is the deterioration of the bending wheel and bending wheel guide.
Replace them with new ones.
Replacement parts list for HAKKO 153/154
