24 (39)
Hakki Pilke 27
Original
Version 5-2014
Splitting the Last Cut Piece of Wood
4. Close the splitting chute cover and bring the splitting control lever to the
In
operation
position.
5. Start the splitting with the pedal.
Splitting a Split Piece of Wood
Do as instructed above in section
Splitting the Last Cut Piece of
Wood
(page 22)
.
Removing Wood Caught in the Splitting Blade
If the splitting cylinder does not have the power to split the wood intended for
splitting, do as follows:
1. Bring the splitting control lever to the
Reverse
position to return the splitting
cylinder to its initial position.
2. Leave the control lever in the
Stop
position.
3. Open the splitting chute cover using the handles.
Look out for the splitting blade during the removal!
4. After removing the wood, move it to the side or put it back into the splitting chute
and lower the splitting blade to its lowest position. The blade will then split the wood
only into two pieces, for which the cylinder has enough power.
5. Lower the splitting chute cover and move the splitting control lever to the
In
operation
position.
6. Start the splitting movement with the splitting pedal.
1.
Bring
the
splitting
control lever to the Stop
position.
2. Open the splitting
chute cover using the
handles.
3. Drop the wood into
the splitting chute.
Cover lifting
handles
