background image

3 / 19 

 

HakkiFeed 422 rev. A 

Translated 

Version 1-2019 

 

1.

 

General information 

1.1.

 

Introduction 

The  purpose  of  this  manual  is  to  ensure  that  the  machine  is  used  in  the  manner  intended  by  the 
manufacturer, taking safety into consideration. Everyone operating the machine or working in close proximity 
to it must study this manual carefully. 
 
Before commencing work, operators must also familiarise themselves with the machine's control and safety 
equipment, and ensure their proper operation. 
 
Additional information on Maaselän Kone Oy’s products is available on our website at 

www.hakkipilke.fi

. 

Keep this manual in the immediate vicinity of the machine.  

1.2.

 

Purpose of use 

The  HakkiFeed  422  log  rack  is  intended  for  moving  pruned  wood  or  logs  onto  a  Hakki  Pilke  firewood 
processor.  The  firewood  processor  must  not  be  used  to  process  any  treated  wood,  such  as  is  found  in 
construction waste. 
 
The maximum diameter of the logs to be processed is 40 cm. This limit must not be exceeded. The maximum 
length of the logs to be placed on the rack is 4 metres, and the minimum length is 2 metres. 
 
Machine models and basic information 
Model 

HakkiFeed 422 (accessory, Hakki Pilke) 

Driving power 

Hakki Pilke firewood processor’s hydraulics (max 200 bar, max 16 l/min) 

Weight 

330 kg 

Height/width/length 

 (mm) 

Max log diameter 

40 cm 

Max/min log length 

4,000 mm–2,000 mm 

Max load-bearing capacity 

2,000 kg 

 
The  machine’s  serial  number,  year  of  manufacture,  weight  and  model  are  provided  on  the  grey  type  plate 
fixed to the machine’s frame. (Figure) 

1.3.

 

Operating conditions 

 

The temperature range within which the machine can be operated is -20 to +30 °C. In the winter, the 
operator must ensure that there is no risk of slipping in the working area. 

 

The working area must be level and clear of unnecessary items. No unauthorised persons may enter 
the working area. The machine may only be used in sufficient lighting conditions. 

1.4.

 

Safety instructions 

 

This machine is intended to be operated by only one operator. The danger zone is 10 metres around 
the machine. 

 

Persons under 18 years of age may not operate the machine. 

 

The operator must ensure that the use of the device does not cause danger to others and that there 
are no unauthorised persons in the danger zone. 

Summary of Contents for HakkiFeed 422




















Reviews: