hajdu HB200C, Installation, Usage And Maintenance Manual

Page: 83 / 313

_________________________________ ___EN__________________________________36
Figure 7.2.-8.
Filter installation to the air inlet of the appliance. If the appliance is connected to air
duct, a filter must be mounted to the air inlet of the air duct.
Figure 7.2.-9. Figure 7.2.-10.
In order to drain condensate water continuously, please install the appliance on a
horizontal floor. If this is not possible, please ensure that the drain vent is at the
lowest possible place. It is recommended to place the appliance in a way that the
inclination angle between the appliance and a vertical line is not more than 2°.
9.2. First start up
Before first start up of the appliance, please, check the following
elements:
The filter must be mounted by the
user of the appliance, the mesh size
is about 1.2mm.
Drain
Filter
Drain