manualshive.com logo in svg

Haivision Makito, User Manual, Page: 97 / 294

Share
Download
Haivision Makito User Manual Download Page 97

Managing the Encoder 

Configuring the RTSP Server

Makito User’s Guide, v2.1.0, Issue 01

97

Configuring the RTSP Server

From the 

RTSP S

ETTINGS

 page, you can configure the Makito to interoperate with Real-

Time Streaming Protocol (RTSP)-based software players such as HaiPLAY

, 

QuickTime, 

VideoLan VLC, or Wowza Server (Flash) for real-time streaming. 

NOTE  

The number of RTSP clients (i.e., players) is limited to 16. This applies whether 

using unicast or multicast IP addressing.

To configure “HiLo” streaming, you must define the RTSP settings for the second encoder 
instance in the “Low” column. 

To generate the SDP (Session Description Protocol) file to download to your computer or 
server to interoperate with QuickTime or a Streaming Server, see 

“CDN and Flash Interop-

erability”

 on page

 

94.

To configure the RTSP Settings:

1.

Click 

S

YSTEM

 from the main menu, and then click 

E

NCODER

>RTSP

 from the sub-

menus.

The 

RTSP S

ETTINGS

 page opens, as shown in the following example.

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments