manualshive.com logo in svg

Haivision Makito, User Manual

Share
Download
Haivision Makito User Manual Download Page 94

Managing the Encoder 

Configuring the Stream Settings

Makito User’s Guide, v2.1.0, Issue 01

94

CDN and Flash Interoperability

The Makito can now stream directly to a Flash Media Server (FMS) or Flash-based Content 
Delivery Network (CDN) using the Real Time Messaging Protocol (RTMP). 

•

The supported RTMP servers are FMS and Wowza. 

•

The supported Transcoders are Wowza and Haivision’s KulaByte Transcoder. 

•

The supported CDNs are Akamai and Limelight. 

This section provides the steps to set up an RTMP stream. 

To stream to a Flash Media Server or Flash-based CDN:

1.

From the 

S

TREAM 

O

VERVIEW

 page, set the Stream Protocol Type to RTMP (as shown 

in the following example).

2.

Type in a unique name to identify the stream.

NOTE  

You can optionally configure “HiLo” video streaming or either Metadata capture. 

For information on either of these, see 

“Video Settings”

 on page

 

72 or 

“Configuring 

Metadata Capture”

 on page

 

80.

3.

Type in a Fully Qualified Domain Name (FQDN) for the application endpoint of the 
FMS or CDN server.

Fill in to configure

the RTMP stream

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands