Haivision Makito User Manual Download Page 239

Page: 239 / 294

CLI Command Reference

stream

Makito User’s Guide, v2.1.0, Issue 01

239

STREAM

ARAMETERS

pause

Pauses the specified stream ID or name. See

NOTE:

If configured, a still image will be streamed instead of the

configured video source. See

“stillimage”

on page

242.

resume

Resumes the specified stream ID or name.

delete

Deletes the specified stream ID or name.

get

Gets stream status information. See

stream Parameters

below.

You can specify a stream or

all

streams.

clear

Clears all active sessions on the encoder.

help

Displays usage information for the

stream

command.

Parameter

Default

Description/Values

addr

n/a

The destination IP address. Enter an IP

address in dotted-decimal format.
For multicast addresses, see

IMPORTANT

on page 243.

port

n/a

The destination UDP port. Enter a number in

the range

1025..65,535

. Note that RTP

streams use

even numbers only

within this

range.

Optional stream Parameters

n/a

A unique number assigned to the stream.

NOTE:

When creating a stream, you can

specify a unique id to assign to it or let the

system assign one (a sequential number) for

you.
Most commands will accept the stream id or

name (see below) in order select the proper

stream to manage.

name

n/a

(Optional) When creating a stream, you can

also specify a name for the stream.

characters

Summary of Contents for Makito







































































































































































































































































































Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands

Haivision Makito, User Manual

Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands