manualshive.com logo in svg

Haivision Makito, User Manual

Share
Download
Haivision Makito User Manual Download Page 183

CLI Command Reference 

account

Makito User’s Guide, v2.1.0, Issue 01

183

account

S

YNOPSIS

account uname create [role=admin]
account uname/all get 
account uname/all list
account uname passwd 
account uname pubkey add|remove keyfile
account uname pubkey list
account uname lock 
account uname unlock 
account uname delete 

D

ESCRIPTION

The 

account

 command is used to create, delete and modify administrative user accounts 

for the Makito.

NOTE  

The 

account

 command can only be used by the Administrator. 

A

CTIONS

create

Creates a new user account.

See 

account Parameters

 below for roles.

You will be prompted to enter and confirm the initial 
password.

get

Displays the account information for the user or the 
Makito, including account name, role, state, password 
expiry status, and Public Key(s).

list

Lists the account information for the user or the Makito in 
table format.

passwd

Modifies the user account password. 

You will be prompted to enter and confirm the password 
(which the user will have to change upon first login). For 
the allowed characters, see 

“Password Requirements”

 on 

page

 70.

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands