Haivision Makito User Manual Download Page 184

Page: 184 / 294

CLI Command Reference

account

Makito User’s Guide, v2.1.0, Issue 01

184

ACCOUNT

ARAMETERS

Parameter

Default

Description/Values

Use with account

create command

specify the role for the user account, either:
•

Admin

•

Operator

•

Guest

For details on roles, see

ACCOUNT

XAMPLES

#$ account all list

name

role

state

pwd expiry

pubk

----------- ---------------- --------- ---------------- ----
admin

Administrator Enabled never

fdfdf

Guest

Enabled never

mrmichel Operator

Enabled by admin

operator Operator

Locked never

user

Guest

Enabled never

LSO

•

Managing Accounts

on page 138

pubkey add|remove

keyfile

Adds or removes a Public Key to the user account.

for

information.

pubkey list

Lists any Public Key files that have been uploaded for this
account.

lock

Locks the user account (if Enabled).

unlock

Unlocks the user account (if Locked).

delete

Deletes the user account.

role

Summary of Contents for Makito







































































































































































































































































































Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands

Haivision Makito, User Manual

Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands