manualshive.com logo in svg

Haivision Makito, User Manual

Share
Download
Haivision Makito User Manual Download Page 177

CLI Command Reference 

Command Summary and Usage Information

Makito User’s Guide, v2.1.0, Issue 01

177

Command Summary and Usage Information

The Makito CLI commands are divided into two main groups: operation and administra-
tion: 

•

Operation Commands

 are used to manage the Audio/Video data path, processing, and 

features, including audio/video/metadata content selection, logo, audio/video 
encoding, H.264 streaming, and image snapshots. Operation command effects are 
immediate but not persistent (i.e., between reboots) unless the current operating 
configuration is explicitly saved (using the 

config

 command). 

•

Administration Commands

 address the security and network configuration. Their 

effects are persistent but not always immediate; some require system reboot to take 
effect. Administration commands are divided into two subgroups: 

Network and 

Management

 and 

Security

. 

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands