Haivision Makito, User Manual

Page: 148 / 294

Managing Users and Security
Managing Security Policies
Makito User’s Guide, v2.1.0, Issue 01 148
Policy Settings
The following table lists the Policy settings for the encoder:
Policy Setting Default Description/Values
Password Policies
Minimum password
length
6 characters Type in the minimum password length
(from 6-40 characters).
NOTE:
Passwords can be up to 80
characters.
Password quality Basic Select the required password quality;
works in conjunction with Password
requires at least below:
• Basic: Sets the minimum password
length as the only requirement to accept
a new password.
• Strong: Adds more strict requirements to
the password structure. Checks for
minimum length as well as other criteria
such as minimum number of required
upper case characters, digits, and
symbols.
Password requires
at least
n/a if Basic
0 characters if
Strong
( Password quality must be Strong) Specify
the minimum required number of:
• uppercase letters
• digits
• symbols
The range is from 0 to 40 for all 3.
Password
expiration
Disabled To enable Password expiration, check the
checkbox.
Change password
after
n/a if Disabled
90 days if
Enabled
( Password expiration must be enabled)
Type in the number of days after which
users must change their passwords (from
1-180 days).
Session Policies
Auto Logout Disabled To enable Auto Logout, check the
checkbox.
See the following section,
“Auto Logout” .
Logout when idle
for
n/a if Disabled
15 minutes if
Enabled
( Auto Logout must be enabled)
Type in the maximum length of time the
system may be idle before the user will be
logged out (from 1 - 1440 minutes).