Haivision Makito, User Manual

Page: 122 / 294

Managing Users and Security
Viewing System Status Information
Makito User’s Guide, v2.1.0, Issue 01 122
Viewing System Status Information
From the S
TATUS
page, you can view status information about the Makito, such as the
operating system up time, along with information about the hardware and software compo-
nents. The page displays a “snapshot” of the encoder faceplate that shows the A/V inter-
face.
The S
TATUS
page displays the Card Status, Card Type, Part Number, Serial Number,
System Uptime, Encoding Chipset Load (%), Firmware Version, Firmware Date, Hardware
Version, and Boot Revision for the encoder.
You can also reboot the encoder and take a system snapshot from the
S
TATUS
page.
The
S
TATUS
page is available Operator and Guest users as well as Administrators.
To view status information:
1.
Click A
DMINISTRATION
from the main menu and then click S
TATUS
from the submenu.
The
S
TATUS
page opens, as shown in the following example.
The
S
TATUS
settings are read-only. For details, see the following section, “Status Set-
tings” .
2.
To reset the video encoder, click Reset (see “Reset” on page 123).
3.
To reboot the encoder, see “Rebooting the Encoder” on page 124.