manualshive.com logo in svg

Haivision Makito, User Manual

Share
Download
Haivision Makito User Manual Download Page 119

Managing Users and Security 

Configuring Network Settings

Makito User’s Guide, v2.1.0, Issue 01

119

Configuring Network Settings

From the 

N

ETWORK 

S

ETTINGS

 page, you can modify the network interface settings for the 

encoder, including the unit’s IP Address. You can also configure Network Time Protocol 
(NTP) support to synchronize the encoder clock with the selected time zone. 

CAUTION  

When you make changes to the Network Settings, be sure to write down the 

new encoder IP Address or label the chassis. After you save your changes and reboot, 

you will have to redirect the browser to the new IP address and log in again in order to 

access the encoder. 

To view and configure the Network Settings:

1.

Click 

N

ETWORK

 from the main menu.

The 

N

ETWORK 

S

ETTINGS

 page opens, as shown in the following example.

2.

Select or enter the new value(s) in the appropriate field(s). See 

“Network Settings”

 on 

page

 

120.

3.

To save your changes, click 

.

You must reboot the system for the changes to take effect. 

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands