Haivision Makito User Manual Download Page 120

Page: 120 / 294

Managing Users and Security

Configuring Network Settings

Makito User’s Guide, v2.1.0, Issue 01

120

To apply your saved changes, click

The encoder will reboot and you will be returned to the Login page.

Network Settings

The following table lists the Encoder Network settings:

Network Setting

Description/Values

Link

Determines whether the Ethernet parameters are set

automatically or manually (i.e., enables or disables

autonegotiation):
•

Auto

- The system will match the Ethernet Speed and

Duplex Mode to the Ethernet hub to which it is

connecting:

•

Manual

- These values must be set manually. See

following settings.

NOTE:

Always use Auto with Gigabit Ethernet (GigE)

speed (1000 Mbps).

Ethernet Speed

If Link is set to Auto, the actual value for the Ethernet

Speed (read-only).
-or-
If Link is set to Manual, select the Ethernet Speed (in

Mbps):
• 1000
• 100
• 10

Duplex

If Link is set to Auto, the actual value for the Duplex Mode

(read-only).
-or-
If Link is set to Manual, select the Duplex Mode:
• Full
• Half

DHCP

Check or clear this checkbox to enable or disable the

Dynamic Host Configuration Protocol.

NOTE:

When DHCP is enabled, the encoder will get an IP

Address from a DHCP server on the network. When it is

disabled, you must manually enter the encoder’s IP

Address, Netmask & Gateway Address.

IP Address

Displays the IP Address for the Makito. This is a unique

address that identifies the unit in the IP network.

NOTE:

If DHCP is disabled, you may enter an IP address

in dotted-decimal format.

Summary of Contents for Makito







































































































































































































































































































Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands

Haivision Makito, User Manual

Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands