Configuring A/V Services Using SNMP
SNMP Utilities
Makito
X User’s Guide, v2.2, Issue 02
244
SNMP Utilities
The following table summarizes the SNMP commands which can be used to set values or
request information from the MIB objects on the local host or on other SNMP agents
reachable over the IP networks.
The SNMP utilities are located in the directory
/usr/bin
.
For more information on an SNMP command, enter the command with the
-h
(or
--help
)
argument.
To do this…
Use this command…
To retrieve the value of an object from a network entity.
snmpget
To set information on a network entity.
snmpset
To retrieve management information from a network entity.
snmpstatus
To retrieve the values of
all
objects under a particular
location in the MIB object hierarchy tree. Use to obtain the
values of all the objects under the system and interfaces
nodes.
NOTE:
The retrieval of a complete subtree is referred to as
“walking the MIB.”
snmpwalk
