manualshive.com logo in svg

Haivision F-MB21B-R, User Manual

Share
Download
Haivision F-MB21B-R User Manual Download Page 186

System Administration and Storage 

Configuring Network Settings

Makito

 

X User’s Guide, v2.2, Issue 02

186

Addressing

DHCP

Check or clear this checkbox to enable or disable the 
Dynamic Host Configuration Protocol. 

NOTE: 

When DHCP is enabled, the encoder will get an IP 

Address from a DHCP server on the network. When it is 
disabled, you must manually enter the encoder’s IP 
Address, Netmask & Gateway Address.

Assign Link-Local 

Address When DHCP 

Fails

(

DHCP

 must be enabled) When this checkbox is checked, 

and DHCP is used but no DHCP server is present to assign 
an IP address to the device, the device will automatically 
assign itself an IP address in the 169.254.0.0/16 range.
This allows you to use the device locally on a LAN (the 
address is NOT routable) in situations where DHCP is not 
available or failed.

IP Address

Displays the IP Address for the Makito

 

X. This is a unique 

address that identifies the unit in the IP network. 
-or-
If 

DHCP

 is disabled, you may enter an IP address in dotted-

decimal format.

Netmask

Displays the Subnet Mask for the Makito

 

X. This is a 32-

bitmask used to divide an IP address into subnets and 
specify the network’s available hosts.
-or-
If 

DHCP

 is disabled, you may enter a Netmask in dotted-

decimal format.

Gateway

Displays the gateway address of the network (typically the 
address of the network router). 
-or-
If 

DHCP

 is disabled, you may enter a gateway address in 

dotted-decimal format.

Hostname

You may, optionally, enter a unique name for the Makito

 X.

DHCP Vendor Class 

ID

(

DHCP

 must be enabled) You may, optionally, specify the 

DHCP Vendor Class ID (option 60). This allows IT 
departments to identify Makito

 X 

devices 

on 

their 

networks.

The default Device Identification value for the Makito

 X 

is 

"Haivision Makito X Encoder"

.

Network Setting 

Description/Values (Cont.)

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands