manualshive.com logo in svg

Haivision F-MB21B-R, User Manual

Share
Download
Haivision F-MB21B-R User Manual Download Page 175

System Administration and Storage 

Viewing System Status Information

Makito

 

X User’s Guide, v2.2, Issue 02

175

The Status settings are read-only. For details, see the following section, 

“Status Set-

tings”

. 

2.

To reboot the encoder, see 

“Rebooting the Encoder”

 on page

 176.

3.

To display a snapshot of system information, see 

“Taking a System Snapshot”

 on 

page

 176.

Status Settings

The following table lists the Status settings. Status information can be useful for trouble-
shooting and may be forwarded to Haivision Technical Support if you are requesting 
technical support. 

Status Setting

 Description/Values

 

Card Status

OK (or error message if applicable).

Card Type

The type of encoder, e.g., Makito2 Dual-SDI Encoder.

Part Number

The Haivision part number for the encoder, e.g., B-292E-
HDSDI2

Serial Number

The serial number for this encoder appliance or card.

Firmware Version

The firmware version of the encoder, e.g., v2.2-47

Firmware Date

The firmware release date.

Firmware Options

(If applicable) Firmware options installed, e.g., KLV-COT 
(Metadata Capture KLV & COT). For more information, 
see 

“Configuring Metadata Capture”

 on page

 102.

Hardware Version

The hardware version of the encoder.

Hardware Compatibility

-001G (basic card assembly). 

CPLD Version

The CPLD version of the encoder. 

Boot Version

The Boot version of the encoder. 

System Uptime

The length of time the encoder has been “up” and 
running (e.g., 1 day 03:42:03).

Encoding Chipset Load

The combined video encoding processor usage in 
percentage% (combining both Hi and Lo streams).

Displays a snapshot of system information in a new 
window. See 

“Taking a System Snapshot”

 on page

 176.

Reboots the encoder. See the following section, 

“Rebooting the Encoder”

.

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands