Haivision F-MB21B-R User Manual Download Page 161

Page: 161 / 420

Managing the Encoder

Configuring Logo Overlays

Makito

X User’s Guide, v2.2, Issue 02

161

To select the image for the logo overlay, click the image or check the checkbox next
to the image filename and click

Select

To configure the position, transparency, and scaling for the logo overlay, select or
enter value(s) in the appropriate field(s). See

“Logo Settings”

on page

161.

To delete one or more image files from the Logos list, check the checkbox next to one
or more filenames (or check

All

) and click

Delete

on the Content toolbar.

To apply your changes, click

Apply

NOTE

Logos are stored on the Makito

X file system in the folder

/usr/share/haivision/logos

Logo Settings

The following table lists the Logo controls and settings:

Logo Setting

Default

Description/Values

n/a

On the Makito

X SDI dual channel, ID is the

video input, either 0 for BNC-1 or 1 for BNC-2.
The ID is

on the Makito

X-DVI or SDI single

channel since there is only one video input.

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands

Haivision F-MB21B-R, User Manual

Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands