HairMax LaserComb Ultima 9 Classic, User Manual, Page: 13 / 28

11
When the battery is fully charged, the
indicator light will be on. As the battery
power diminishes, the light will blink slowly.
When the battery is getting low and needs
to be recharged, the light will start to flash
rapidly. When this happens, charge your
HairMax with one of the charging options as
described on page 10.
Proper Use
The HairMax Ultima 9 Classic should be used for 11 minutes
and HairMax Ultima 12 Classic for 8 minutes.
Use a watch or clock to time your treatment.
First, press the power button and hold until
power button light turns on. Second, press the
laser button. Your HairMax is ready for use.
Shine the HairMax onto the palm of your hand
and you will see that the laser light is on (do not
look at the laser light directly). Do not use your
HairMax if the device is damaged or defective,
contact HairMax customer service or your place
of purchase.
Treatment Instructions
Before beginning treatment, be sure to
test the HairMax for sensitivity (Page 5).
After you have turned on your HairMax,
place it flat on your scalp so that both
rows of the teeth are touching your
scalp.
Start at your hairline. Move your HairMax
from front to back of scalp in a slow
combing motion, pausing every ½ inch
(1cm) for 4 seconds. Do not lift your
HairMax off your scalp while combing
from front to back. Next, lift your
HairMax off your scalp and start at a new
position at the hair line.
PROPER USE | TREA
TMENT
INSTRUCTIONS
PROPER USE | TREATMENT INSTRUCTIONS
PO
WER BUTT
ON
LA
SER BUTT
ON
PO
WER BUTT
ON
LA
SER BUTT
ON
PO
WER BUTT
ON
LA
SER BUTT
ON
PO
WER BUTT
ON
LA
SER BUTT
ON
PO
WER BUTT
ON
LA
SER BUTT
ON