+
-
+
-
+
-
REMOVABLE CARDBOARD STRIP
Your Advanced 7 LaserComb comes
with four AA batteries
already
installed. Prior to use, remove the
cardboard strip located in the battery
compartment (Figure A). For more
detailed instructions on how to
remove the cardboard strip and to
replace the batteries please refer to
your User Manual.
The LaserComb can also be powered
directly by the optional power cord
(not included). Plug the power cord
into the end of the LaserComb. Plug
the other end into an electrical wall
outlet (Figure B).
To turn on the LaserComb
slide the
power/laser button to the middle or
top position. Middle position activates
the laser and vibrate feature. Top
position is laser only (Figure C).
A
The HairMax LaserComb® is a very effective device when used
correctly. It is manufactured using precision components and should
last 10-15 years under normal usage.
Please take time to read the
entire User Manual before operating the HairMax LaserComb.
Advanced 7 LaserComb
Use the LaserComb for 15 minutes, 3 times a
week. The treatments should be spaced every
other day, for example Monday, Wednesday,
Friday. Move the LaserComb slowly 1/2 inch
every 4 seconds.
It is recommended but not essential that the LaserComb be used
on a clean scalp after washing. Your hair can be wet, towel dried or dry.
The LaserComb should be used prior to applying any topical treatments,
gels, spray or concealing products.
B
Laser Light - Avoid Direct Eye Exposure
Advan
C
The HairMax Advanced 7 is indicated to treat Androgenetic Alopecia, and promote hair growth in
males
who have Norwood Hamilton Classifications of IIa to V and in
females
who have Ludwig (Savin) I-4, II-1,
II-2, or frontal patterns of hair loss and who both have Fitzpatrick Skin Types I to IV.
Before beginning treatment,
be sure
to test the LaserComb for sensitivity
(see page 5 of your User Manual).
To start your treatment place the
LaserComb flat on your scalp so
that both rows of teeth are touching
the scalp (Figure D).
Start at your hairline.
Move the
LaserComb from front to back of scalp
in a slow combing motion, stopping
every ½ inch (1cm) and pausing for 4
seconds (Figure E). Do not lift the
LaserComb off your scalp while
combing from front to back.
Next, lift the LaserComb off your scalp
and start at a new position at the hair
line. Continue in this manner from front
to back and then side to side (Figure F)
until you cover your entire scalp with
multiple passes. When the LaserComb
is on it will vibrate every four (4) seconds.
This means that it is time to move the
LaserComb to the next area of the
scalp. Repeat these passes within the
required treatment of 15 minutes.
If you have long hair,
use your fingers
to lift your hair out of the way while
using the LaserComb to be sure that
the laser energy reaches your scalp
(Figure G).
After treatment,
turn off the
LaserComb by sliding the power/laser
button to the lowest position. If using
the optional power cord, remove the
power cord from the electrical wall
outlet (Figure H). Store the device in
the cradle/stand for future use.
Advanc
H
D
G
E
F
140466_Lex.indd 2
140466_Lex.indd 2
1/14/14 3:15 PM
1/14/14 3:15 PM
Process Cyan
Process CyanProcess Magenta
Process MagentaProcess Yellow
Process YellowProcess Black
Process BlackPANTONE 631 C
PANTONE 631 C
