EN
23
◼
Before the end of the autonomy period, the On/Off button flashes (Fig. 1-B).
Charge the trimmer battery, refer to § 3.1.
◼
The trimmer can be used with the electrical lead. For this, connect the cable to
the trimmer (Fig. 2a) and connect the power pack (Fig. 1-H) to a mains power
socket.
3.3.
USING THE COMB ATTACHMENTS
◼
The trimmer must be switched off. Select a comb attachment
(Fig. 1 refs. D-F).
◼
Place the comb attachment on the blade and clip it in at the rear. When the
comb attachment is correctly fixed, it is immobilized.
3.4.
REPLACING CUTTERS
◼
Switch the trimmer off and unplug the power pack from the mains power
supply.
◼
Take the screws out of the cutters (Fig. 3) and remove the upper and lower
cutters.
◼
Replace the guide on the lower cutter and reinsert the cutters.
◼
Tighten the two screws (Fig. 3).
4.
SERVICING
4.1.
ROUTINE SERVICING
◼
After 30 minutes of use, it is advisable to lubricate the cutters. Use the
lubricating oil supplied with the trimmer (Fig. 1-I).
◼
Lubricate the cutters at least once a day (Fig. 4).
◼
After using the trimmer each time, clean the cutters with the brush supplied
(Fig. 1-J).
◼
If necessary, clean the body of the trimmer with a cloth slightly moistened with
water or mild liquid soap. Never use abrasive products or solvents.
◼
Clean the blade with an antibacterial spray. We recommend the STERIL
CLEANER 920- cleaning, lubricating and disinfecting product.
4.2.
CLEANING THE BLADE
In the case of intensive use, clean the blade at least once a day.
◼
Remove the blade as described in § 3.4.
◼
Clean the inside of the blade with the brush supplied (Fig. 1-J).
◼
Lubricate the cutters (Fig. 4) and put the blade back on the trimmer as
described in § 3.4.
