TOPlus mini / TOPlus premium pull-back
Layout and function
Order h49 7144.907-333
31
4.2 Accessories required
4.2.1 Spindle flange
The spindle flange helps to adapt the clamping device to suit
the machine tool.
Depending on the scope of delivery, the spindle flange can
either be supplied with the unit or provided by the customer.
4.2.2 Drawtube adapter
The drawtube adapter serves as a connector between the
drawtube on the machine tool and the clamping device and,
depending on the type of machine, can be configured in var-
ious forms.
4.2.3 Clamping head
The clamping head is there to support the workpiece being
machined. It consists of hard steel and rubber segments con-
nected by vulcanization.
Depending on workpiece requirements, various sizes of
clamping head are available, also with different profiles and
bores.
4.2.4 Workpiece end-stop
The workpiece end-stop is produced with an end-stop di-
mension that reflects customer wishes.
4.2.5 Test kit
The test kit is only essential for TOPlus premium to align the
product.
4.3 Optional accessories
The following optional accessories are available for different
sizes of product.
4.3.1 Jaw module
The jaw module is an adaptation clamping device for the
use with jaws. It enables the diameter of the jaw clamping
range to be expanded.
