Hailo EVB
™ | Getting started guide
| User’s guide
Page 17 Rev. 1.0 Confidential and Proprietary | Copyright © 2021
–
Hailo Technologies Ltd.
7.
Driver installation PCIE
After you have downloaded the SDK run the following command:
chmod u+x
install
.sh
./install.sh --install-pcie-driver --install-firmware
This command will compile the PCIe driver for the machine’s kernel version
and
install
the driver and the SDK. The command will ask for root permissions
during the installation in order to install the driver.
Reboot the machine after the
install
ation is done.
8.
Connecting the device
8.1.
Dip switch configuration
There are two main dip switch controllers where you can choose the board boot
configuration.
When booting from PCIe, the device will download the firmware via the PCIe.
In that case make sure the dip switch is set to the PCIe option.
When the EVB is connected via Ethernet cable and not a PCIe slot make sure the dip
switch is set to the FLASH option
