En
gl
is
h
5
Hailo Libero 3.0 configuration
Procedure for a new device:
-
Plug in the power supply unit and wait until the light is permanently lit (this takes
about 5 minutes).
-
To switch the WLAN on, press the Reset button (Fig. 1) for 1 second. The device
will beep once.
-
You can then establish a connection to the Libero 3.0 through your device (PC,
tablet or smartphone).
-
Search for the Libero 3.0 on your WLAN network settings and connect the devices
to each other (the Access Point name is: Lib30_XXXXXX).
-
The password for the Libero 3.0 is
0123456789
.
-
Once the devices are connected to each other, you can call up the login page of the
Hailo Libero on your web browser (Edge, Firefox, Chrome, etc.) via the IP address
192.168.4.1:81
.
-
The browser will then show the login page for your Hailo Libero. The password is
hailo
.
-
If everything has been entered correctly, the web browser page will open automatically.
-
We recommend that you start by configuring the basic settings of the Hailo Libero.
-
To do so, push the slide control into the desired positions.
-
To test the changes, you must first save them.
-
As soon as the settings meet your requirements, you can close the browser again.
-
If no further settings are to be made, you can switch the WLAN signal off again via the Reset button (Fig. 1).
-
To do so, press the Reset button briefly for 1 second. The device will beep once.
-
The WLAN is now switched off and the device can be operated by foot as normal.
-
If you want to change the settings again, please proceed as described under "
Procedure for a new device
".
Setting options on the device:
LED Brightness:
You can adjust the brightness of the LED using the
slide control.
The higher the value, the brighter the LED will shine.
Ejection Force:
The rail systems have different running
characteristics. You can use the slide control to adjust the speed of
opening and the opening depth to suit your requirements.
Detection Range:
The detection range allows you to set the height
from which the sensor is to react.
The lower the value, the higher you must lift your foot in order to
activate the Hailo Libero.
(Fig. 1)