HaiLin Controls
P age 2 of 2
CODE SETTING
"
Turn off the thermostat, simultan eously press “ ” and “
¥
” for three seconds til l to display “XX ”
℃
(“RT” disappears),
then press “
”, “XX
”disappears
℃
automat ically, temporalit y, press “
T
” and “
S
” to number them a nd the s ystem will
automatically confirm the codes set (The codes range from 1 to 32).
FUNCTIONS ASSOCIATED WITH TIMER ARE IN THE FOLLOWING (-T )
"
Clock calibration: Press “
¥
” till to display “hh:mm” and “mm” flash, press “
S
” or “
T
” to adjust minute, press “
¥
”, “hh”
flash, press “
S
” or “
T
” to adjust hour; Press “
¥
”, “week” flash, press “
S
” or “
T
” to adjust Mon to Sun.
"
Sleep function setting: Press “
¥
”, till to display “ ” and flash, press “
S
” to confirm, press “
T
” to cancel.
"
Timer on /Timer off: Press “
¥
” till to display “
¥
”and “TIMER ON” and all flash, and also “mm” flash, press “
S
” or “
T
”
to adjust minute, press “
¥
”, “hh” flash, press “
S
” or “
T
” to adjust hour; Press “
¥
” till to display “
¥
” and “TIMER OFF” and all
flash, and also “mm” flash, press “
S
” or “
T
” to adjust minute, press “
¥
”, “hh” flash, press “
S
” or “
T
” to adjust hour.
"
Canceling timer on / Canceling timer off: Press “
¥
” till to displ ay “
¥
” and “T IMER ON” and all flas h, and also “mm”
flash, press “
S
” or “
T
” to adjust minute to “00”. press “
¥
”, “hh” flash, press “
S
” or “
T
” to adjust hour to “00” ; Press “
¥
” till to
display “
¥
” and “TIMER OFF” and a ll flash, and also “mm” flash, press “
S
” or “
T
” to adjust min ute to “00”. press “
¥
”, “hh”
flash, press “
S
” or “
T
” to adjust hour to “00”.
AUTO RESTART
(Option)
"
When the thermostat is at ON status for one minute, if power cut, it will return back to running automatically with the
status how it is one minute ago after power coming back.
"
When the thermostat is at OFF status for one minute, if power cut, it will keep OFF status after power coming back.
DEFROST (LOW TEMPERATURE PROTECTION)
"
Description: when the thermostat turns of f and the room temperat ure is lo wer than 5
,
℃
it will be turned o n
automatically in heating mode with “ ” showing, under HL8002DA-MD/DB-MD models, the system will be in heat mode and
fan runs in hi gh speed. Under HL8002Y-MD model, the motori zed damper will be o pen. The thermostat will turn off w hen
room temperature is higher than 7
℃
.
"
Set low temperature protection: Turn off the thermostat, press “ ” and hold for 3 sec onds, it will display “00” or “01”,
press “
S
” or “
T
” key to adjust. “00” ind icates low temperature protection invalid, “01” i ndicates low temperature protection
function valid. The default is “00”.
ALARM
"
When Communication doesn’t work normally, the screen will display “ ”.
WIRING DIAGRAMS
MOUNTING
Note: Be sure to connect all the wires as per the wiring diagrams and keep it away from water, mud
and other material so as to prevent the unit being spoiled!
1. O pen t he mai n c ontrol
panel: p ut the s crewdriver
(3.5mm) in to the bl ock
4mm a long th e bevel.
Prize up, open the clips.
2. Take off the wires.
3. A s p er w iring diagram,
connect it w ith t erminals,
fixed by the screwdriver.
4. Put th e co nnected
thermostat o nto th e ba ck
panel in the wall, then fix it
with the tw o screws in the
packing box.
5. P ut t he cover w ith 30
degree an gle, th en f ix t he
up two clips;
6. Pu sh th e pl aces of t he
two dow n cli ps, fix the
cover, and f inish t he
installation.
HL8002DA-MD/DB-MD
L
Val
Med
Low
Fan
Valve
AC85
～
260V 50/60Hz
N L
Hi
A
B
−
N
RS485
4800 bps
Damper
HL8002Y-MD
L
VO
VC
AC85
～
260V 50/60Hz
N L
A
B
−
N
RS485
4800 bps
