hailie NF0101, Product Manual, Page: 10 / 28

10
2.3 Compatible Inhalers
The Hailie ™ sensor is designed to work only with the
HandiHaler
™
Inhaler as indicated on the Hailie
™
sensor label.
The Hailie ™ sensor intended population is identical to
the intended population of the compatible Inhaler.
e
Setting up the
Hailie
™
Sensor
3.1 Preparation for First Use
Following manufacture, the Hailie
™
sensor is placed in
Deep-Sleep mode to conserve battery life. To check if
the Hailie ™ sensor is still in Deep-Sleep mode, press
the Status Button once. The LEDs will flash white if it is
still in Deep-Sleep.
Before first use, place the Hailie ™ sensor on charge for
up to 4 hours or until the LEDs stop flashing green.
This will wake the Hailie
™
sensor from Deep-Sleep mode.
When recharging is completed, disconnect the Hailie ™
sensor from the power supply. Press the Status Button
once more to check the battery level. The LEDs should
flash green prior to first use.