Haier XQS60-78H User Manual Download Page 5

Do not put hand into the rotating tub. It is dangerous 

even if the rotation speed is slow.  Take special care of 
the  children.  Keep  children  away  from  the  washing 
machine  to avoid them climbing on.

 Do not decompose, repair or alter the machine by

 yourself.

Do not put any hot or heavy items (such as the 

kettle with hot water) on the washing machine.

Do not wash laundry with volatile materials 

 (such as thinner, petrol etc.).

Keep the machine away from direct sunlight and

 heat source like the heater.

The handicapped or children without care shall not

use the machine.

   Please  keep the lint filter in good  condition, and 
install it  to proper position  during washing.  If  the
lint filter is lost or damaged, please contact the local 
after-sales service department of our company.

Benzene

Safety precautions

  To  protect  your  laundries  and washing  machine, 
please take out all of the coins, buttons, sand, hairpin
and other foreign materials before washing.

   Please check if the water faucet is open, and if the 
connection of the water inlet pipe is proper.
   It is suggested to use foamless washing powder.

The back cover of lint filter

The front cover of lint filter

install

dismantle

Summary of Contents for XQS60-78H




















Reviews: