7. T oo much spinning noise
If t he noise of the motor
is too much?
If the motor is fastened
tightly?
If the bearing of the retarder
is wel l?
If the departing of
the ratchet and pawl
is w ell?
If the machine body
vibrate resonantly with the
cabinet?
If the balance ring is ru bbing
the outer tub cover?
If the connecting pipe
or the wire unit bumps
the outer tub?
Fasten the motor.
Replace the bearing.
Adjust the angle or the distance of
the ratchet and pawl. The distance
between the ratchet and the pawl is
above 2mm.
Adjust the cabinet to acquire
balance.
Adjust the gap between the
balance ring and the outer tub.
Fix the connecting pipe and
the wire unit.
Replace the motor.
The hanger seat is lack of oil.
Inject oil at the hanger seat.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
6. No spinning
The washing and
draining are normal.
Check the On/Off point of the
safety switch.
Check if the clutch pawl
is pulled enough.
Replace the safety switch.
Replace the Electro-magnet iron
Replace the retarder .
No On/Off point
No
Yes
Normally
Trouble-shooting
T able