background image

 Program Selection

8

NOTE: ” o ”means softener liquid detergent  canbe added when necessary.
            “

”means detergent can be added when necessary.

            “

”means no detergent can be added.

1. Power supply

Plug in the power supply
220V~/50Hz.

3.

 

Laundry treament

5.Wash  Load

2. Water supply

Turn on the tap ensure that the water is clear.
 Caution: Before staring the washing machine turn on the
water faucrt to ensure that the water faucet and the water
inlet hose are connected correctly and do not leak.

=

sort out clothes according to type and extent of dirt.

There are three types of clothes: cotton, synthetical and
woolen (silk) fabrics.

 separate white clothes from colored. If whites and

coloreds  are combined for one load, make sure the
coloreds are colorfast.
-Remove  all objects from pockets that may cause dam-
age to the machine, such as keys and coins.

-Clothing with frayed edges or yarns should be put in  a
wash bag or special  bag before washing.
-Repaire  damaged clothing,lose buttons or damaged zips
and hooks before washing.
-Bed sheets and table ware should be loosely loaded and
not folded.

=

This washing machine is for household use and de-

signed for mechanically washable clothes. When washing,
separate unwashable clothes with reference to clothes
labels.

4. Detergent selection

Only special low foam detergent
should be used in automatic
drum washing machine, form
blended or wool fabrics special
detergent should be used. dry
cleaning solvent should not be
used such as trichhloroethylene
or alike (caution :load the re-
quired amount of detergent only).

Type

non-fade cottons Delicat fabrics

Woolen fabrics

2.5kg

Blending fabrics

Max load

5kg

2kg

1kg

Preparation

9

Summary of Contents for XQG50-600SW











Reviews: