Haier XQBM20-E User Manual Download Page 8

Confirm      if 
there's special
requirment for 
the laundries.

Clear the pocket.
Take   out   the 
coins ,  sand,
hairpins etc.

Fasten    the 
buttons   and 
zippers.

When the pulsator
is  running  ,   the 
buttons   of    the 
l a u n d r i e s   m a y  
cause noise. For 
t h e   s a k e   o f  
discretion,please
put the laundries 
with buttons  into 
other laundries.

Preparation before washing
1.Connect the water inlet hose and open 
the water tap .
2.Confirm  that the washing machine is
earthed reliably .  Then insert the power
plug into the receptacle. Do not connect
the  earth  terminal  to  the gas pipe and 
tap water pipe.
3.Put down the drain hose. 

The  quantity  of 
  the     laundries
shall  not exceed
the   rated  value.
The big laundries
like   the    jeans 
shall  be  put  in 
loosely.

Using process

Using process

1 Preparation before washing

Pay attention to followings before washing the laundries 

a.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not waterabsorbing,please put them into water with hands.
d.For laundries with much soil,please remove the soil first.You can add detergent on the 
   part with serious soil directly.It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before 
   putting them into the water.
f.Do not put the laundries polluted with chemicals directly into the washing machine.
g.For those small laundries ,laundries likely to be twisted or worn,and woolen laundries,
   please put them into mesh bag before wasing. 

Summary of Contents for XQBM20-E


















Reviews: