How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation
position of the drain hose.
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 2).
Embed the drain hose into the groove along the
side of the spin tub in the order of (1)~(3), heading
for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.
Figure 1
Figure 2
Figure 3
Figure 4
Embed into the
groove in turn
Extend the drain hose from the side of spin tub
Soft item
Extend to the
spin tub side
Take out the drain hose from the fixing groove.
Extend it fromthe rear side as per the direction
of the arrow. (When the drainhose is extended
from the rear side, it can be hung on the
point for drain hose at the two sides of the cabinet.)
(See to Figure 4).
Soft item
Back
Front
Extend the drain hose from the rear side
Install the water inlet hose; Quick water-filling entrance Select the water level
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever to needed line.
Water inlet hose
Water inlet
Please fix water inlet hose according to the fact of the
washing machine model which you bought.
Figure 1 shows the frame of the control panel
Figure 2 shows the frame of the control panel
Insert the water inlet hose into the water-filling
entrance on the control pane directly.(pull it
out to dismantle it)
Insert the water inlet hose into the water-
filling entrance on the control panel,
then push the water-filling jointer into
the entrance on the control panel.
(To dismantle the water inlet pipe,just
push the control handle as indicated in the
figure and pull it out)
Water inlet hose
Water inlet jointer
Control handle
Push
Water inlet
Figure 1
Figure 2
Water level
indicator
Maximum
Max
Medium
Med
Min
Minimum