manualshive.com logo in svg

Haier WMS650, User Manual, Page: 11 / 20

Share
Download
Haier WMS650 User Manual Download Page 11

 OFF

 OFF

DRAIN

STRONG

Washing sequence

Figure 1

Figure 2

Figure 3

Figure 4

    WOOL

    WOOL

    WOOL

 SPIN TIMER

WASH TIMER

WASH TIMER

WASH SELECTOR

             LINEN

             LINEN

Using process

Using process

Wash

 SILK

 SILK

 SILK

  COTTON

  COTTON

DRAIN

STRONG

WASH SELECTOR

WASH SELECTOR

1. Fill the water and add the dissolved washing 
   powder to make the water level reach the preset 
   position. (Figure 1)
   Run washing program for some time to stir and 
   dissolve the powder completely.

2.Put in the laundries. If the water quantity is 
  insufficient, please add water.

3.Select the current.
   Select the strength of the current according to
   the laundries. (Figure 2)

4.Select the washing time
   Select the washing time according to the laundries. 
  (Figure 2)

5.After washing, set the "WASH  SELECTOR" at 
   "DRAIN". (Figure 4).

SOFT

SOFT

SOFT

STRONG

Wash timer

(To set to below 2 minute,

first set to 5 minute then

turn it back. it can increase

the service life of the timer).

Wash selector

 (Soft  current,

   strong current)

 Spin timer

 (To  set  to below 1 minute, 

 first  set  to  2  minute then 

 turn it back. it can increase

 the service life of the timer).

Spin water-filling entrance

 OFF

DRAIN

Spin water-filling entrance

Summary of Contents for WMS650





















Reviews:

No comments